Smart-technologies Sympodium ID250 User Manual download pdf (Page 14)

8 Installing the ID250

1. Press the Menu button.

The On Screen Display Menu opens.

2. Use the – and + buttons to select the Pitch option, and then press the Enter button.

The Pitch screen appears.

3. Use the – and + buttons to evenly display the pattern of vertical stripes on the screen.

4. Press the Enter button.

5. Use the – and + buttons to select the Phase option, and press the Enter button.

The Phase screen appears.

6. Use the – and + buttons to make the adjustment pattern show clearly.

7. Press the Menu button to exit the On Screen Display Menu.

Tethering the Pen

You can attach the tether between the pen and the ID250, so the pen is always within reach.

1. There is a loop in the cord at each end of the tether. Thread one loop through the opening at

the end of the pen, and then slip the rest of the cord through the loop.

2. Thread the other loop through the plastic loop on the back of the ID250, and then slip the pen

and the rest of the tether through the loop.

3. Gently pull both loops so they’re snug.

Securing the ID250

You can secure the ID250 by attaching a cable (not supplied) between the security slot that’s built

into the back of the unit and an immovable object.

Other Integrations

Depending on your equipment and your expertise, you may want to integrate the ID250 with other

devices. You can easily adapt the ID250 to expand the multimedia capabilities of the equipment in

the room. For example, you can integrate your ID250 with a projector and a SMART Board

interactive whiteboard.

NOTE: If you want to use a video cable longer than 50' (15 m), you must boost the video signal by

using a video distribution amplifier.

To adjust the pitch and phase

To attach the tether to the pen and the ID250

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

No comments

Smart-technologies Sympodium ID250 User Manual Page 14