SMART Technologies UF75/UF75w User Manual

PLEASE THINK BEFORE YOU PRINTKnowledge baseMaintaining your SMART UF75 or UF75w projectorCleaning the projectorWARNINGCleaning a wall-mounted project

smarttech.com/support smarttech.com/contactsupport© 2011 SMART Technologies ULC. All rights reserved. SMART Board, smarttech, the SMART logo and all

2 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 OR UF75W PROJECTOR – If necessary, use a soft cloth moistened with a mild detergent to clean the proj

3 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 OR UF75W PROJECTOR• When replacing the projector lamp:– Put the projector into Standby mode and wait

4 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 OR UF75W PROJECTOR TIPIf the cover is difficult to remove, insert a flat screwdriver or small coin in

5 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 OR UF75W PROJECTOR9. Use the same attachment to vacuum the vents on either side of the projector.To

6 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 OR UF75W PROJECTOR 3. Access the service menu to reset the lamp hour counter. See Resetting the lamp

7 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 OR UF75W PROJECTORTIPMove the focus lever until it is almost in the locked position. The friction wi

8 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 OR UF75W PROJECTOR To adjust the verticalkeystone of the projectedimageLoosen or tighten the lower sc

9 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 OR UF75W PROJECTORTo center the projectedimageIf the image is off center, use a wrench to turn the a